Skip to main content

Erskine Falls Access Road

VICTertiary road1.5 km4 segments
5.4Sports
7.7Safety
1.5 kmTotal length
4Segments

Erskine Falls Access Road is a 1.5 km sealed tertiary route in Victoria, Australia. It scores 9.2/10 for EVs with highly technical corners and excellent surface. It also rates well for 4WDs and motorcycles.

No street view at this location

7-day forecast

Punteggi per veicolo
5.4/10
SPTSportStrade asfaltate, tortuosità, passi di montagna
8.4/10
MOTMotoCurve strette, tornanti, strade tecniche
9.2/10
EVEVManto liscio, strade asfaltate, amico dell'autonomia
8.5/10
4x44x4Accesso ghiaia, idoneità fuoristrada
1.9/10
VANCaravanAsfalto liscio, pendenze dolci, nessun passo ripido
Distribuzione qualità dei tratti
Punteggio Sport - 4 tratti
Discreto (4-6)100%

IQR punteggio Sport: 5.4 - 5.4

Surface
Surface coverage
Sealed100%
Dettaglio del punteggio
Punteggi mediani dei componenti su tutti i tratti
Manto
10.0
Qualità mediana del manto. Asfalto liscio = 10. Chipseal = 8. Ghiaia = 5.
Tortuosità
10.0
Tortuosità mediana. Punteggi più alti significano più curve per chilometro.
Velocità
7.0
Adeguatezza del limite di velocità. Punto ideale a 60-110 km/h.
Classe stradaTertiary road
9.0
Classificazione stradale. Le autostrade hanno zero. Le strade terziarie hanno 9.
Traffico
9.0
Densità di traffico stimata. Meno traffico = punteggio più alto.
Dislivello
10.0
Variazione di altitudine per chilometro. Più salita = punteggio più alto.
Road intel
Wet riskElevated
Average wet sensitivity across segments, based on surface, drainage, gradient and local rainfall.
Night riskPresent
Visibility at night across the road, weighted by lighting, tree canopy density and curves.
Wind exposureHigh
Average wind exposure across segments, based on measured wind speed, terrain and shelter. Relevant for motorcycles and caravans.
Sun glarePresent
East-west segments exposed to sunrise and sunset glare, adjusted for tree cover.
Ambiente stradale
Indicatori di rischio derivati da geometria e clima
Esposizione strada bagnata53%
Rischio guida notturna71%
Esposizione al vento63%
Rischio abbagliamento solare75%
Rischio impatto fauna11%

Risk values derived from road geometry, orientation, weather station data, and satellite canopy cover. 0 = minimal risk, 1 = maximum risk.

Segments
API reference
Road aggregate data via the Contour API
GET/api/v1/roads/erskine-falls-access-road-vicRoad aggregate - scores, stats, risk profile, activity, segment list
GET/api/v1/roads/search?q=Erskine%20Falls%20Access%20Road&state=VICSearch roads by name

Councils & Government

This road is part of VIC's road network. Contour scores every road in Australia for surface condition, curviness, grey spot classification, and 4WD track passability. If your organisation manages this road or promotes tourism in the region, this data is available via API.

Enquire about council data access →
Frequently asked questions
How long is Erskine Falls Access Road?+

Erskine Falls Access Road is approximately 1.5 km long. At typical touring speeds, expect a few minutes of driving end to end, excluding stops.

Is Erskine Falls Access Road sealed?+

Yes. Erskine Falls Access Road is fully sealed for its entire length.

Is Erskine Falls Access Road good for motorcycles?+

Yes. Erskine Falls Access Road scores 8.4/10 for motorcycles, placing it among the stronger rides in the region. Corners, surface and elevation all contribute to the rating.

Can I drive Erskine Falls Access Road in a caravan?+

Not recommended. Erskine Falls Access Road scores 1.9/10 for caravans due to geometry, surface or gradient. Consider an alternative route if towing.

Is Erskine Falls Access Road good for an EV?+

Yes. Erskine Falls Access Road scores 9.2/10 for EVs. Regenerative braking on any elevation changes and smooth throttle control on the corners will both feel at home here.

Similar roads

Road data last updated: 2 May 2026. Scores are based on road geometry, surface, and traffic data. Always drive to conditions and follow local road rules.