Skip to main content

Mears Lane

QLDTertiary road2.4 km6 segments
5.0Sports
7.4Safety
2.4 kmTotal length
6Segments
6Grey spot segments

Mears Lane is a 2 km sealed tertiary route in Queensland, Australia. It scores 8.4/10 for EVs with highly technical corners and excellent surface. It also rates well for motorcycles and 4WDs.

7-day forecast

Punteggi per veicolo
5.0/10
SPTSportStrade asfaltate, tortuosità, passi di montagna
7.8/10
MOTMotoCurve strette, tornanti, strade tecniche
8.4/10
EVEVManto liscio, strade asfaltate, amico dell'autonomia
7.5/10
4x44x4Accesso ghiaia, idoneità fuoristrada
5.0/10
VANCaravanAsfalto liscio, pendenze dolci, nessun passo ripido
Distribuzione qualità dei tratti
Punteggio Sport - 6 tratti
Discreto (4-6)67%Scarso (<4)33%

IQR punteggio Sport: 4.1 - 5.3

Surface
Surface coverage
Sealed100%
Dettaglio del punteggio
Punteggi mediani dei componenti su tutti i tratti
Manto
10.0
Qualità mediana del manto. Asfalto liscio = 10. Chipseal = 8. Ghiaia = 5.
Tortuosità
10.0
Tortuosità mediana. Punteggi più alti significano più curve per chilometro.
Velocità
7.0
Adeguatezza del limite di velocità. Punto ideale a 60-110 km/h.
Classe stradaTertiary road
9.0
Classificazione stradale. Le autostrade hanno zero. Le strade terziarie hanno 9.
Traffico
9.0
Densità di traffico stimata. Meno traffico = punteggio più alto.
Dislivello
7.0
Variazione di altitudine per chilometro. Più salita = punteggio più alto.
Storico incidenti
Aggregato su 6 tratti
6
Zone grigie

Il collegamento dei registri incidenti non è ancora disponibile per QLD. Le zone grigie sono tratti dove la geometria di curvatura non corrisponde al limite di velocità - vengono segnalate indipendentemente dallo storico incidenti.

Ambiente stradale
Indicatori di rischio derivati da geometria e clima
7.4/10 punteggio di sicurezza - più alto è più sicuro
Esposizione strada bagnata48%
Rischio guida notturna62%
Esposizione al vento61%
Rischio abbagliamento solare70%
Rischio impatto fauna10%

Risk values derived from road geometry, orientation, weather station data, and satellite canopy cover. 0 = minimal risk, 1 = maximum risk.

Road roughness
NAASRA roughness index - median across segments
1.77IRI m/km

Coverage: 17% of segments surveyed. Source: Queensland Department of Transport and Main Roads.

Segments
API reference
Road aggregate data via the Contour API
GET/api/v1/roads/mears-lane-qldRoad aggregate - scores, stats, risk profile, activity, segment list
GET/api/v1/roads/search?q=Mears%20Lane&state=QLDSearch roads by name

Councils & Government

This road is part of QLD's road network. Contour scores every road in Australia for surface condition, curviness, grey spot classification, and 4WD track passability. If your organisation manages this road or promotes tourism in the region, this data is available via API.

Enquire about council data access →
Frequently asked questions
How long is Mears Lane?+

Mears Lane is approximately 2 km long. At typical touring speeds, expect around 1 hour of driving end to end, excluding stops.

Is Mears Lane sealed?+

Yes. Mears Lane is fully sealed for its entire length.

Is Mears Lane good for motorcycles?+

Yes. Mears Lane scores 7.8/10 for motorcycles, placing it among the stronger rides in the region. Corners, surface and elevation all contribute to the rating.

Can I drive Mears Lane in a caravan?+

With care. Mears Lane scores 5.0/10 for caravans. Some sections may be tight or rough for a heavy tow.

Is Mears Lane good for an EV?+

Yes. Mears Lane scores 8.4/10 for EVs. Regenerative braking on any elevation changes and smooth throttle control on the corners will both feel at home here.

Are there any dangerous sections on Mears Lane?+

Contour has identified 6 grey spots on Mears Lane - sections where the road geometry does not match the posted speed limit. Take extra care in wet or low-visibility conditions.

Similar roads

Road data last updated: 23 April 2026. Scores are based on road geometry, surface, and traffic data. Always drive to conditions and follow local road rules.